conky

我配置的效果图(由于配置文件多次更改，此图已不完全)：


我的.conkyrc 配置文件：

# Conky sample configuration
#
# the list of variables has been removed from this file in favour
# of keeping the documentation more maintainable.
# Check http://conky.sf.net for an up-to-date-list.

# set to yes if you want Conky to be forked in the background
background yes

# X font when Xft is disabled, you can pick one with program xfontsel
#font 5x7
#font 6x10
#font 7x13
#font 8x13
#font 9x15
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*

# Use Xft?
use_xft yes

# Xft font when Xft is enabled
xftfont microsoft yahei:size=11

# Text alpha when using Xft
# xftalpha 0.8

# Print everything to stdout?
out_to_console no

# MPD host/port
# mpd_host localhost
# mpd_port 6600
# mpd_password tinker_bell

# Print everything to console?
out_to_console yes

# mail spool
mail_spool $MAIL

# Update interval in seconds
update_interval 1.0

# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0

# Create own window instead of using desktop (required in nautilus)
own_window yes

# If own_window is yes, you may use type normal, desktop or override
#own_window_type normal

# Use pseudo transparency with own_window?
own_window_transparent yes

# If own_window_transparent is set to no, you can set the background colour here
own_window_colour hotpink

# If own_window is yes, these window manager hints may be used
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes

# Minimum size of text area
minimum_size 300 5

# Draw shades?
draw_shades yes

# Draw outlines?
draw_outline no

# Draw borders around text
draw_borders no

# Draw borders around graphs
draw_graph_borders yes

# Stippled borders?
stippled_borders 4

# border margins
border_margin 1

# border width
border_width 5

# Default colors and also border colors
default_color white
default_shade_color black
default_outline_color black

# dexter_client yes
# dexter_server yes

# config file for libdexter (default search path: $HOME/.dexterrc; /etc/libdexter/dexter.conf)
# dexter_config

# Text alignment, other possible values are commented
#alignment top_left
alignment top_right
#alignment bottom_left
#alignment bottom_right
#alignment none

# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 12
gap_y 12

# Subtract file system buffers from used memory?
no_buffers no

# set to yes if you want all text to be in uppercase
uppercase no

# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 2

# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2

# Force UTF8? note that UTF8 support required XFT
override_utf8_locale yes

# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer yes

# Allow each port monitor to track at most this many connections (if 0 or not set, default is 256)
max_port_monitor_connections 256

# Maximum number of special things, e.g. fonts, offsets, aligns, etc.
max_specials 512

# Maximum size of buffer for user text, i.e. below TEXT line.
max_user_text 16384

# variable is given either in format $variable or in ${variable}. Latter
# allows characters right after the variable and must be used in network
# stuff because of an argument

# stuff after 'TEXT' will be formatted on screen

TEXT
$stippled_hr
$nodename - $sysname $kernel
${color lightblue}Uptime:$color $uptime ${color lightblue}- Load:$color $loadavg
$stippled_hr
${color lightblue}CPU Usage:${color} $cpu% ${alignr}${exec sensors|grep °C|cut -b 15-21}
${color #88aadd}${cpugraph 00ff00 00ff00}
${color lightblue}RAM Usage:${alignr}${color} $mem/$memmax - $memperc%
${color #88aadd}${membar}
${color lightblue}Swap Usage:${alignr}${color} $swap/$swapmax - $swapperc%
${color #88aadd}${swapbar}
${color lightblue}Disk Usage:${color}${alignr}${exec hddtemp /dev/sda|cut -b 28-32}
${color}/ $color${fs_used /}/${fs_size /} ${color #88aadd}${fs_bar /}
${color}WinC $color${fs_used /media/WinC}/${fs_size /media/WinC} ${color #88aadd}${fs_bar /media/WinC}
${color}WinD $color${fs_used /media/WinD}/${fs_size /media/WinD} ${color #88aadd}${fs_bar /media/WinD}
${color}WinE $color${fs_used /media/WinE}/${fs_size /media/WinE} ${color #88aadd}${fs_bar /media/WinE}
${color}WinF $color${fs_used /media/WinF}/${fs_size /media/WinF} ${color #88aadd}${fs_bar /media/WinF}
${color}WinG $color${fs_used /media/WinG}/${fs_size /media/WinG} ${color #88aadd}${fs_bar /media/WinG}
${color lightblue}Network: ${alignr}${color lightblue}IP: ${color} ${addr ppp0}
$color${font eexp:size=12}D${font} ${color #8844ee} ${downspeed eth0} k/s$color ${alignr 50}${font eexp:size=12}U${font} ${color #22ccff} ${upspeed eth0} k/s
${color #0000ff}${downspeedgraph eth0 22,150 ff0000 0000ff} ${color #22ccff}${upspeedgraph eth0 22,150 0000ff ff0000}
${color}$stippled_hr
${color lightblue}Processes:$color $processes ${color lightblue}Running:$color $running_processes
${color lightblue}CPU Top5:${alignr}PID CPU% MEM%
${color} ${top name 1} ${alignr}${top pid 1} ${top cpu 1} ${top mem 1}
${color} ${top name 2} ${alignr}${top pid 2} ${top cpu 2} ${top mem 2}
${color} ${top name 3} ${alignr}${top pid 3} ${top cpu 3} ${top mem 3}
${color} ${top name 4} ${alignr}${top pid 4} ${top cpu 4} ${top mem 4}
${color} ${top name 5} ${alignr}${top pid 5} ${top cpu 5} ${top mem 5}
${color lightblue}MEM Top5:${alignr}PID CPU% MEM%
${color} ${top_mem name 1} ${alignr}${top_mem pid 1} ${top_mem cpu 1} ${top_mem mem 1}
${color} ${top_mem name 2} ${alignr}${top_mem pid 2} ${top_mem cpu 2} ${top_mem mem 2}
${color} ${top_mem name 3} ${alignr}${top_mem pid 3} ${top_mem cpu 3} ${top_mem mem 3}
${color} ${top_mem name 4} ${alignr}${top_mem pid 4} ${top_mem cpu 4} ${top_mem mem 4}
${color} ${top_mem name 5} ${alignr}${top_mem pid 5} ${top_mem cpu 5} ${top_mem mem 5}
${color}$stippled_hr
${color}${execi 3600 echo "`w3m -dump "http://wap.weather.com.cn/wap/58453/h24/"`"|sed -n "2,9p"|sed 's/\ .*$//'}